JEM Radio II Operation Manual - Buttons
JEM Radio II
Operation Guide
Buttons
• The number buttons 0 – 9, ‘*’, ‘#’ are used to send DTMF tones, enter AAR channels, enter
RAN codes and make menu selections.
• The PTT (Push To Talk) button will put the radio in transmit mode.
• The VOLUME button will increment/decrement the audio volume of the front panel speaker as
well as the speaker outputs on the 12 pin connector on the back of the radio.
• The CHAN button allows for AAR channel number entries.
• The MENU button accesses extra options such as read text messages and change some radio
settings.
• The RAN button allows for the entry of RAN codes when on a digital channel or PLL tones
when on an analog channel. See (Appendix A). Pressing RAN when on a digital channel
button will display “RAN _ _ _ _”.
• Pressing RAN when on an analog channel will display “PLL _ _ __” (Feature needs to be
enabled, refer to JEM Radio II Software Guide.)
• Pressing Home followed by # will revert to the previous Channel/RAN/PLL that the radio was
on.
5