Kan200 - kan200+ ver. 2.0 kan200 - kan200+ user guide english.
Kan200 - kan200+ ver. 2.0 2 table of contents symbols ................................................................................ 3 1. Introduction ..................................................................... 4 2. Key features ..............................................................
Kan200 - kan200+ ver. 2.0 3 this symbol alerts the user to the presence of recommendations about product’s use and maintenance. This symbol alerts the user to the presence of recommendations about the product’s use and maintenance. K-array declares that this device is in compliance with applicable c...
Kan200 - kan200+ ver. 2.0 4 1. Introduction 2. Key features 3. Applications the k-array anakonda kan200 is a truly revolutionary speaker module born to meet the needs of places where few had dared to go up to now. It is designed to be a problem solver in situations where a traditional speaker box ca...
Kan200 - kan200+ ver. 2.0 5 read these instructions - keep these instructions - heed all warnings 5. Safety information warning. Failure to follow these safety instructions could result in injury or damage to the device or other property. Important safety instructions • read these instructions. • ke...
2019 mm 2000 mm 98.8 mm 80 mm 31 mm 35 mm 27.5 mm 27.5 mm m5 n°2 holes m5 n°2 holes 56 mm 56 mm 35 mm kan200 - kan200+ ver. 2.0 6 6. Unpacking each k-array speaker is built to the highest standard and thoroughly inspected before leaving the factory. Upon arrival, carefully inspect the shipping carto...
Kan200 - kan200+ ver. 2.0 7 8. Connectors and set up parallel input. Nl4 four-pins female speakon connector parallel output/link. Nl4 four-pins male speakon connector connector secure lock. Pull it back and turn the connector to unplug it..
Kan200 - kan200+ ver. 2.0 8 9. Wiring audio power signal on pins 1+/1- of the nl4 speakon connectors is fed into the speaker, while the signal on pins 2+/2- passes through from one socket to the other. Thus, the signal can pass through multiple modules without additional external cabling. You can co...
Kan200 - kan200+ ver. 2.0 9 30° 160° 10° 10. Coverage.
Kan200 - kan200+ ver. 2.0 10 socks wall bracket multi purpose bracket when the k-anlink is used to connect a kan200 /kan200+ to another kan200/kan200+ it integrates perfectly to make a uniform-looking series of speakers. See pag. 8 for wiring details. 11. Accessories k-anlink (not included).
Kan200 - kan200+ ver. 2.0 11 12. Service to obtain service: 1) contact the official k-array distributor in your country. Your local distributor will direct you to the appropriate service center. 2) if you are calling for service, please have the serial number(s) of the unit(s) available for referenc...
Kan200 - kan200+ ver. 2.0 12 13. Technical specifications acoustics power handling 150 w (aes) max power 300 w (1) impedance 64 Ω frequency range 150 hz – 18 khz +/-6db (2) spl 1w/1mt 86 db (3) maximum spl 96 db (cont.) – 102 db (peak) (4) coverage horizontal 160° vertical 10° crossover type externa...
Kan200 - kan200+ ver. 2.0 13 14. Declaration of conformity.
