K-array AnaKonda KAN200 User Manual - page 8
KAN200 - KAN200+
Ver. 2.0
8
9. wIRIng
Audio power signal on pins 1+/1- of the NL4 Speakon connectors is fed into the speaker, while the signal
on pins 2+/2- passes through from one socket to the other. Thus, the signal can pass through multiple
modules without additional external cabling. You can connect a series of up to 16 KAN200 (32 m) or up
to 8 KAN200+ (16m) to a single channel of a 4
Ω amplifier.
Signal on pins 2+/2- can then be easily fed into another series of KAN200/KAN200+ modules with
the insertion of a K-ANLINK accessory that twists the pins 1+/1- and 2+/2-. This way you can create a
continuos line of up to 32 KAN200 (64m) or up to 16 KAN200+ (32m)
KAN200
.....
Up to 16 KAN200 / 8 KAN200+
KA84 AMP
OUT A (1+/1-)
KA84 AMP
OUT A (1+/1-)
OUT A (2+/2-)
KAN200
KAN200
KAN200
.....
KAN200
KAN200
KAN200
.....
KAN200
KAN200
OUT B (1+/1-)
KAN200
.....
KAN200
KAN200
Standard Wiring
Wiring with the K-ANLINK Accessory
K-anlInK
Up to 16 KAN200 / 8 KAN200+
Up to 32 KAN200 / 16 KAN200+
Amplifier
Max KAN200 per channel
Max KAN200+ per channel
KA84
16 units (32 meters)
8 units (16 meters)
KMT12
8 units (16 meters)
4 units (8 meters)
KMT18
8 units (16 meters)
4 units (8 meters)