K-Star K-5-D Instruction Manual

Summary of K-5-D

  • Page 1

    Warranty (for the original owner only) (for warranty information, please mail to manufacturer.) customer’s name : address : phone : unit serial # : model # : date purchased : installer’s name : k-star pool/spa heater is guaranteed for a period of one year from the date of its purchase to the origina...

  • Page 2

    2 1) installation figure 01. Leakage current collector diagram k-star heater may be installed indoors or outdoors with clearance of at least 6’away from water and minimum of 6” clearance from any object. Ensure that the installation allows access for electrical and plumbing connections and that the ...

  • Page 3

    10 the “lock” condition is part of the security/safety feature of this heater and it is to ensure, that user will physically check the thermostat unit and verify the unit is in optimal operating condition before turning the heater back on. 4) high limit reset a high limit manual reset thermostat is ...

  • Page 4

    4 table 01 table 02. The wire sizes to be used are as follows: all models max gpm/flow rate k-5 (all models) 8 k-10 (all models) 10 k-15 (all models) 10 systems with higher gpm ratings will require a bypass around heater or 2 way valve to reduce water fl ow if required. This would be necessary if a ...

  • Page 5

    8 selecting range (choose pool or spa application) 2a) after point 1 has been completed, the display will show “ra “(for range) for one second. Press up or down button to toggle between “p “(for pool) or “s “(for spa) mode. Choose the scale setting according to your application “p” (for pool) or “s”...

  • Page 6

    6 wiring diagrams – all models 2d) warning: ensure that the unit is properly grounded at the provided lug within the unit and that the leakage collectors are separately grounded at the back of the unit (marked “bonding lugs”). Improper installation may be a potential cause of fi re, electric shock, ...