K-Star K1032 Operating Instructions Manual - Halogen Bulbs
HALOGEN BULBS
ALWAYS SWITCH OFF THE ELECTRICITY SUPPLY BEFORE CARRYING OUT ANY
OPERATIONS ON THE APPLIANCE.
To change bulbs:
1.Rotate the cover in anticlockwise, as
shown. CAUTION: BULB MAY BE HOT,
PLEASE ROTATE WHEN THE BULB
IS COOL!
2.Replace with a Type JC, 12Volt,
20Watt Max, and G-4 Base bulb. Do
not touch replacement bulb with bare
hands! If the bulb is touched with the
bare hand, it should be cleaned with a
lint-free cloth moistened with
methylated spirit.
LED LIGHTS
ALWAYS SWITCH OFF THEELECTRICITY SUPPLY BEFORE CARRYING OUT ANY
OPERATIONS ON THE APPLIANCE.
To change the light:
Open the filter and find the spring of
the light,
push the spring and the light
will be slip out.
Change the light as
with same kind of 4Volt, 3
Watt LED
light. CAUTION: LIGHT MAY BE
HOT, PLEASE ROTATE WHEN
THELIGHT IS
COOL!
WARRANTY
We will warrant this product free from defects in material and quality for one year and motor for
5 years. If any problems occur from correct usage, please contact the service department for
under warranty service.
This warranty does not cover the following:
The filter mesh and bulb.
Commercial use.
Amendment of the date of manufacture on the rating plate.
Damaged caused to the body by usage of detergent sprayer.
Pollution made to the led parts, glass parts and S/S parts.
Incorrect installation, misuse, abuse or neglect.
Incorrectly fitted to insufficient or unsuitable power.
Taken apart or serviced by unauthorized service engineers or replaced with other manufacture’s
components.
For commercial use the maintenance and free service should be discussed with our authorized
agent.
Beyond the 12 month limited warranty period, the purchaser should pay for charge of
components and call out.
In the event of a service call, please provide the warranty card and receipt of date of purchase.