K40 RL200 Quick Reference Manual - Receiving Alerts
5
Receiving Alerts
The K40 RL360 /RL200 provides a combination of audio and visual
alerts to warn you when radar is detected.
Radar Alert Sequence
Your K40 RL360/RL200 detects all industry standard police radar
bands. When a signal is detected:
•
A voice alerts which band was identified. (This assumes the factory
default “Voice ON” setting has not been changed.)
•
The K40 RL360 will announce the direction of the signal’s source,
either front or rear, along with the band detected. K40 RL200 sys-
tems will announce the band detected.
•
A series of tones will be heard indicating the strength of the signal.
Each band has its own distinctive tone. (Volume reduces 50%
automatically after 5 seconds.)
Laser Alert Sequence
(only for RL360’s/RL200’s that include the optional EX or EX2 Defuser System)
When the RL360/RL200 detects a laser signal:
•
A voice announces “Laser.” (This assumes the factory default
“Voice ON” setting has not been changed.)
•
You then hear a distinct and urgent audio tone. (Volume reduces
50% automatically after 5 seconds.)
•
LEDs will pulse rapidly.
Alert Volume Reduction
All audio alerts will automatically be reduced in volume by 50%
after 5 seconds. After 60 seconds, all audio alerts will automatically
become silent. To learn how to MUTE alerts using your remote
control, see page 8.