Portable all-band radar and laser detector with gps technology rls2 owner’s manual.
K40 consult don’t like to read manuals? Call our experienced k40 consultants. We’ll explain the whole thing. 800.323.5608 k40 electronics 600 tollgate rd., suite a elgin, il 60123 www.K40.Com.
Table of contents mounting and powering the rls2 . . . . . . . . . . . . . . .4 mounting instructions . . . . . . . . . . . . . . . . . . . . 4 power connection. . . . . . . . . . . . . . . . . . . . . . . 4 wake-up sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 receiving alerts . ...
Mounting and powering the rls2 mounting instructions to help ensure that your rls2 functions properly and offers maximum protection, please follow these mounting instructions: 1. Clean the area of the windshield where the rls2 will be mounted.* 2. Attach the supplied windshield mounting bracket to y...
Wake-up sequence (using factory default settings) once your k40 rls2 has been mounted and had the power connected, you may begin use immediately by following these steps: 1. Switch on the rls2 – rotate the power on / volume control wheel on the left side of the unit. 2. Listen for wake-up sequence –...
Receiving alerts the k40 rls2 provides a combination of audio and visual alerts to warn you when radar and laser signals are detected. Radar alert sequence the rls2 detects all north american police radar signals (x, k, and ka-band). When a signal is identified: • a voice alerts which band was detec...
Laser alert sequence when the rls2 detects a laser signal: • a voice alert announces, “laser.” (this assumes the factory default “voice on” setting has not been changed.) • you will then hear a distinctive audio tone. • display indicates laser has been detected and reports your speed. • note: unlike...
Special features / functions dim • press and release dim / menu button to adjust display brightness to accommodate various driving environments. Your setting will automatically be saved with the exception of “off.” the “off” setting will revert to “auto” upon rls2 wake-up. The 5 options include: 1. ...
Quiet ride the quiet ride function will automatically silence all radar and laser alerts when traveling under a speed setting of your choice between 5 - 75 mph in 5 mph increments or 10 - 120 kph in 10 kph increments. Visual alerts are unaffected by quiet ride settings. The factory default setting f...
Rls2 radar and laser detection reference guide 10 windshield mounting bracket (with suction cups) – for proper installation (page 4). Power input jack – insert small end of power cord here, and large end into 12v outlet (page 4). Power on / volume control wheel – turn on the rls2 and adjust volume o...
11 dim / menu button – press and release to adjust display brightness (page 8), or press and hold for 3 seconds to enter menu mode (pages 14-15). Dot matrix display – provides alert information as well as filter setting, compass direction, and speed in mph / kph via alphanumeric text. Speaker – aler...
Mark to alert the mark to alert function allows you to add specific gps locations to your personal database, alerting you to any point of interest you choose (such as school zones, speed traps, or red light cameras). • press and release mark button when you want to mark a location for alert. • voice...
• press and hold mute button for 3 seconds to mute audio for 5 minutes or the duration of the alert. Voice will announce, “extended mute on,” and the display will show ext mute . Note: you will only receive new alerts as visual indications on the display while this feature is engaged. Speed monitor ...
Menu / customizable settings the rls2 comes with factory default settings on certain fea- tures that we’ve learned are desirable for our customers. To access and change any of the 13 selectable preferences: • press and hold dim / menu button for 3 seconds. The voice will announce, “menu,” and the di...
1 voice type female choose male or female voice for audio alerts. 2 audible voice on for all initial audio alerts: “voice on” uses voice; “voice off” uses tones only. 3 wake-up wake- controls length of startup sequence after up powering on the rls2. “wake-up long” long is a 5-second sequence. “wake-...
Troubleshooting guide problem possible cause solution plug not inserted properly. Reinsert plug and rotate. Blown fuse in power cord. Replace fuse with 2 amp 250 volt f2al fuse. 12v outlet not clean or consult your dealer or auto negatively grounded. Mechanic. Defective fuse or electrical consult yo...
Register your k40 rls2 today to activate your guarantees: guaranteed immunity from speeding tickets if you get a radar or laser speeding ticket within one year of purchase, we’ll reimburse you for the full cost of the ticket.* guaranteed performance if your k40 rls2 does not outperform any other rad...
Fcc id: w75-rls2 this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. In addi...
44820-11/14.