- DL manuals
- K9
- Remote Control
- K9170LA
- Quick Reference Manual
K9 K9170LA Quick Reference Manual - page 2
Emergency Override:
Panic:
P
ress & Hold the “Lock” Button for 3 Sec’s, with the ignition “Off”
Shock Sensor & Prewarn Bypass:
1)
A
rm the alarm by, Pressing & Releasing the “Lock” button
2)
W
ithin 2 seconds Press & Release the “3rd” button.
To Activate the Auxiliary Channel:
P
ress & Hold The
“3rd”
Button
for 3-Seconds
To Activate Remote Anti-Carjack:
(programmable Dip-Switch # 7)
P
ress & Hold the
“4th”
button, for 3 Secs, with the ignition “On”
Page 2
Hold 3 seconds
Open Electric Trunk
Operate Window Roll-Up Unit
Operate Remote Start Unit
THEN WITHIN
10 SECONDS
PRESS & RELEASE
VALET BUTTON
THE SIREN WILL SOUND
THE PARKING LIGHTS
WILL FLASH
Hold 3 seconds
Then
2.
1.
Hold 3 seconds
Summary of K9170LA
Page 1
Arming: p ress & release the “lock” button silent arming: p ress & release the “3rd” button twice in 3 sec. Disarming: p ress & release the “unlock” button silent disarming: p ress & release the “3rd” button twice in 3 sec page 1 remote control quick reference guide the siren will chirp once the par...
Page 2
Emergency override: panic: p ress & hold the “lock” button for 3 sec’s, with the ignition “off” shock sensor & prewarn bypass: 1) a rm the alarm by, pressing & releasing the “lock” button 2) w ithin 2 seconds press & release the “3rd” button. To activate the auxiliary channel: p ress & hold the “3rd...
Page 3
The system may be "armed" by any of 3 methods: 1) remote control arming: press & release the “lock” button page 3 arming the alarm 2) silent remote control arming: press & release the “3rd” button twice within 3 seconds upon arming: • the siren will chirp one time. • the parking lights will flash on...
Page 4
The system may be "disarmed" by any of 3 methods: 1) remote control disarming: press & release the “unlock” button 2) silent remote control disarming: press & release the “3rd” button twice within 3 sec upon disarm: • the siren will chirp twice. (4 chirps if alarm has activated & reset) • the parkin...
Page 5
Regardless of method used to arm the alarm, once armed, the alarm will monitor all protected zones, and if an intrusion attempt is detected it will activate, or “trigger”. A trigger consists of the following: • the electronic siren, or optionally the vehicle’s horn, will start sounding. • the exteri...
Page 6
The auxiliary channel may be used to operate an optional function. Possibili- ties include remote trunk release, remote car starting, or an on-demand re- mote window roll-up interface. Please see your omega dealer for details on available options. To activate the auxiliary channel: press & hold the ...
Page 7
Page 7 the anti-carjacking sequence may be activated by any of 3 methods: 1) using the remote control, by holding down the small “4th” button for 3 seconds while the ignition is “on”. ( dip-switch # 7) 2) when a door is opened while the ignition is “on” ( dip-switch # 7) 3) every time the ignition i...
Page 8
Page 8 valet mode valet mode can only be entered into while the alarm is disarmed. Valet mode turns off all of the alarm’s security features, (including anti-carjack). Valet mode is designed for situations in which it is not convenient for the security portion of the alarm to be operational; for exa...
Page 9
Page 9 auxiliary sensor : this security system is equipped with an on-board dual zone shock sensor that can be turned on/off via programmable dip-switch #1, as well as a plug-in port for an optional sensor to increase the effectiveness of the system. The comprehensive line of optional sensors offere...
Page 10
The alarm has 8 programmable features which allow it to be customized by selecting the position of “dip switches” to suite many individual needs. The following pages provide a brief explanation for each feature, and notes its factory default setting. Picture of dip switches to program features: step...
Page 11
• = default factory setting dip switch # 3: last door arming & locking: - configures the alarm to automatically arm itself & lock the vehicle doors (if vehicle is properly equipped), 30 seconds after the last door is closed with the vehicle’s ignition “off”. •dip switch “on” = last door arming “on” ...
Page 12
• = default factory setting dip switch # 8: ignition door lock/unlock: - configures the alarm to lock the vehicle's doors when the ignition is turned “on” and unlock the vehicle’s doors when the ignition is turned “off”. •dip switch “on” = ignition door lock/unlock is “on” dip switch off = ignition ...
Page 13
Page 13 brown/white : this wire can be configured (programmable feature # 6), to honk the horn in addition to the brown wire operating the siren, or take over all of the siren’ s functions so tha t no siren is necessar y café/con lista blanca: este cable se puede programar (función # 6), a sonar el ...
Page 14
Page 14 door locking systems / sistemas de cierre negative trigger system / sistema negativo: doorlock switch ground vehicle's doorlock relay control unit lock unlock lock wire / cable de cierre unlock wire/ cable de apertura + doorlock actuators 5 wire reversal (rest at ground): cambio de polaridad...
Page 15
Pagina 12 e • = significa programación de fabrica. Dip switch # 7: anti-atraco a través del «control» o «puerta abierta» si esta función est a encendida, el anti-atraco se activa usando el control remoto, o cada vez que se abre una puerta cuando la ignición esta encendida. Dip switch encendido (“on”...
Page 16
Pagina 11 e • = significa programación de fabrica. Dip switch # 3 armado automático y cierre de seguros : - permite que la alarma se arme automaticamente y cierre los seguros del auto, si están conectados. •dip switch encendido (“on”) = armado y cierre automático activado dip switch apagado = armado...
Page 17
Pagina 10 e la alarma tiene 8 funciones programables que se pueden programar usando los «dip-switches». Estas funciones están listadas en las próximas paginas. Photo de «dip-switchs» para programar las funciones: 1) desconecta la fuente de 12-voltios de la alarma. 2) cambia la posicion de los “dip-s...
Page 18
La alarma viene con un sensor interno de doble zona con pre-alarma. La zona del sensor vigila contra violaciones en general. Si el sensor detecta una violación se dispara la alarma inmediatamente. Este sensor se puede desactivar y reemplazar con un sensor externo zona de pre-alarma: la zona de pre-a...
Page 19
Pagina 8e modo de valet solo se puede entrar al modo de valet cuando la alarma esta desarmada: en el modo de “valet” todas las funciones de seguridad quedan apagadas y solamente las funciones de conveniencia como la apertura y el cierre de los seguros eléctricos funcionan. El modo de valet esta dise...
Page 20
La alarma viene equipada con 3 tipos de protección anti-atraco: 1) anti-atraco por control remoto : («dip-switch» programable # 7) p resione el botón ”#4” por 3 segundos, con la ignición encendida. 2) anti-atraco por una puert a abiert a, con ignición encendida: ( # 7) si el «dip-switch» # 7 esta en...
Page 21
El canal auxiliar se puede usar para operar una función opcional. Por ejemplo, abrir el maletero eléctrico, operar un modulo para arrancar el vehículo, o para subir las ventanas. Canal auxiliar: p resione el botón “#3” por 3 segundos. - se desarma la alarma al activar el canal auxiliar . - el canal ...
Page 22
Al entrar la alarma en el modo armado, la sirena/claxon emite un tono, las luces de estacionamiento hacen una intermitencia, los seguros eléctricos cierran (si están conectados) , el corte de arranque se activa, y la luz led comienza una intermitencia lenta. En este modo, si cualquiera zona detecta ...
Page 23
La alarma se puede desarmar de 3 maneras: 1) desarme usando control remoto: presione el botón del «apertura» 2) desarme silente : presione el botón “#3” 2 veces en 3 segundos. Al desarmar: - la sirena/claxon emite dos tonos. / cuatro tonos si ha sucedido un disparo. - las luces de estacionamiento ha...
Page 24
La alarma se puede armar de 3 maneras: 1) armado usando control remoto : presione el botón de «cierre». 2) armado silente : presione el botón “#3” 2 veces en 3 segundos. Al armar: - la sirena/claxon emite un tono. - las luces de estacionamiento hacen una intermitencia. - los seguros eléctricos cierr...
Page 25
Desarme de emergencia: pánico: p resione el botón de «cierre» por 3 segundos. Eliminación del sensor: 1) a rma la alarma, presione el botón de «cierre» una vez. 2) a ntes que pasen 2 segundos, presione el botón “#3”. Canal auxiliar : p resione el botón “#3” por 3 segundos. Anti-atraco por control re...
Page 26
Armado : p resione el botón de «cierre» una vez. Armado silente : p resione el botón “#3” 2 veces en 3 segundos. Desarme : p resione el botón de «apertura» una vez. Desarme silente : p resione el botón “#3” 2 veces en 3 segundos. Guia de referencia 2 x 2 x indice guía para el usuario armado de la al...