Arming: p ress & release the “lock” button silent arming: p ress & release the “3rd” button twice in 3 sec. Disarming: p ress & release the “unlock” button silent disarming: p ress & release the “3rd” button twice in 3 sec page 1 remote control quick reference guide the siren will chirp once the par...
Emergency override: panic: p ress & hold the “lock” button for 3 sec’s, with the ignition “off” shock sensor & prewarn bypass: 1) a rm the alarm by, pressing & releasing the “lock” button 2) w ithin 2 seconds press & release the “3rd” button. To activate the auxiliary channel: p ress & hold the “3rd...
The system may be "armed" by any of 3 methods: 1) remote control arming: press & release the “lock” button page 3 arming the alarm 2) silent remote control arming: press & release the “3rd” button twice within 3 seconds upon arming: • the siren will chirp one time. • the parking lights will flash on...
The system may be "disarmed" by any of 3 methods: 1) remote control disarming: press & release the “unlock” button 2) silent remote control disarming: press & release the “3rd” button twice within 3 sec upon disarm: • the siren will chirp twice. (4 chirps if alarm has activated & reset) • the parkin...
Regardless of method used to arm the alarm, once armed, the alarm will monitor all protected zones, and if an intrusion attempt is detected it will activate, or “trigger”. A trigger consists of the following: • the electronic siren, or optionally the vehicle’s horn, will start sounding. • the exteri...
The auxiliary channel may be used to operate an optional function. Possibili- ties include remote trunk release, remote car starting, or an on-demand re- mote window roll-up interface. Please see your omega dealer for details on available options. To activate the auxiliary channel: press & hold the ...
Page 7 the anti-carjacking sequence may be activated by any of 3 methods: 1) using the remote control, by holding down the small “4th” button for 3 seconds while the ignition is “on”. ( dip-switch # 7) 2) when a door is opened while the ignition is “on” ( dip-switch # 7) 3) every time the ignition i...
Page 8 valet mode valet mode can only be entered into while the alarm is disarmed. Valet mode turns off all of the alarm’s security features, (including anti-carjack). Valet mode is designed for situations in which it is not convenient for the security portion of the alarm to be operational; for exa...
Page 9 auxiliary sensor : this security system is equipped with an on-board dual zone shock sensor that can be turned on/off via programmable dip-switch #1, as well as a plug-in port for an optional sensor to increase the effectiveness of the system. The comprehensive line of optional sensors offere...
The alarm has 8 programmable features which allow it to be customized by selecting the position of “dip switches” to suite many individual needs. The following pages provide a brief explanation for each feature, and notes its factory default setting. Picture of dip switches to program features: step...
• = default factory setting dip switch # 3: last door arming & locking: - configures the alarm to automatically arm itself & lock the vehicle doors (if vehicle is properly equipped), 30 seconds after the last door is closed with the vehicle’s ignition “off”. •dip switch “on” = last door arming “on” ...
• = default factory setting dip switch # 8: ignition door lock/unlock: - configures the alarm to lock the vehicle's doors when the ignition is turned “on” and unlock the vehicle’s doors when the ignition is turned “off”. •dip switch “on” = ignition door lock/unlock is “on” dip switch off = ignition ...
Page 13 brown/white : this wire can be configured (programmable feature # 6), to honk the horn in addition to the brown wire operating the siren, or take over all of the siren’ s functions so tha t no siren is necessar y café/con lista blanca: este cable se puede programar (función # 6), a sonar el ...
Page 14 door locking systems / sistemas de cierre negative trigger system / sistema negativo: doorlock switch ground vehicle's doorlock relay control unit lock unlock lock wire / cable de cierre unlock wire/ cable de apertura + doorlock actuators 5 wire reversal (rest at ground): cambio de polaridad...
Pagina 12 e • = significa programación de fabrica. Dip switch # 7: anti-atraco a través del «control» o «puerta abierta» si esta función est a encendida, el anti-atraco se activa usando el control remoto, o cada vez que se abre una puerta cuando la ignición esta encendida. Dip switch encendido (“on”...
Pagina 11 e • = significa programación de fabrica. Dip switch # 3 armado automático y cierre de seguros : - permite que la alarma se arme automaticamente y cierre los seguros del auto, si están conectados. •dip switch encendido (“on”) = armado y cierre automático activado dip switch apagado = armado...
Pagina 10 e la alarma tiene 8 funciones programables que se pueden programar usando los «dip-switches». Estas funciones están listadas en las próximas paginas. Photo de «dip-switchs» para programar las funciones: 1) desconecta la fuente de 12-voltios de la alarma. 2) cambia la posicion de los “dip-s...
La alarma viene con un sensor interno de doble zona con pre-alarma. La zona del sensor vigila contra violaciones en general. Si el sensor detecta una violación se dispara la alarma inmediatamente. Este sensor se puede desactivar y reemplazar con un sensor externo zona de pre-alarma: la zona de pre-a...
Pagina 8e modo de valet solo se puede entrar al modo de valet cuando la alarma esta desarmada: en el modo de “valet” todas las funciones de seguridad quedan apagadas y solamente las funciones de conveniencia como la apertura y el cierre de los seguros eléctricos funcionan. El modo de valet esta dise...
La alarma viene equipada con 3 tipos de protección anti-atraco: 1) anti-atraco por control remoto : («dip-switch» programable # 7) p resione el botón ”#4” por 3 segundos, con la ignición encendida. 2) anti-atraco por una puert a abiert a, con ignición encendida: ( # 7) si el «dip-switch» # 7 esta en...
El canal auxiliar se puede usar para operar una función opcional. Por ejemplo, abrir el maletero eléctrico, operar un modulo para arrancar el vehículo, o para subir las ventanas. Canal auxiliar: p resione el botón “#3” por 3 segundos. - se desarma la alarma al activar el canal auxiliar . - el canal ...
Al entrar la alarma en el modo armado, la sirena/claxon emite un tono, las luces de estacionamiento hacen una intermitencia, los seguros eléctricos cierran (si están conectados) , el corte de arranque se activa, y la luz led comienza una intermitencia lenta. En este modo, si cualquiera zona detecta ...
La alarma se puede desarmar de 3 maneras: 1) desarme usando control remoto: presione el botón del «apertura» 2) desarme silente : presione el botón “#3” 2 veces en 3 segundos. Al desarmar: - la sirena/claxon emite dos tonos. / cuatro tonos si ha sucedido un disparo. - las luces de estacionamiento ha...
La alarma se puede armar de 3 maneras: 1) armado usando control remoto : presione el botón de «cierre». 2) armado silente : presione el botón “#3” 2 veces en 3 segundos. Al armar: - la sirena/claxon emite un tono. - las luces de estacionamiento hacen una intermitencia. - los seguros eléctricos cierr...
Desarme de emergencia: pánico: p resione el botón de «cierre» por 3 segundos. Eliminación del sensor: 1) a rma la alarma, presione el botón de «cierre» una vez. 2) a ntes que pasen 2 segundos, presione el botón “#3”. Canal auxiliar : p resione el botón “#3” por 3 segundos. Anti-atraco por control re...
Armado : p resione el botón de «cierre» una vez. Armado silente : p resione el botón “#3” 2 veces en 3 segundos. Desarme : p resione el botón de «apertura» una vez. Desarme silente : p resione el botón “#3” 2 veces en 3 segundos. Guia de referencia 2 x 2 x indice guía para el usuario armado de la al...