Kaco Powador 3200 Operating instructions manual - Regulations
Operating Instructions Powador 3200 / 4400 / 5300 / 5500 / 6600_EN
Page 5
2 Safety Instructions and
Regulations
Accident prevention regulations
The inverter must be installed by an authorised electrician
who is responsible for observing existing standards and regu-
lations.
The proper and safe operation of this unit requires proper
transportation, storage, assembly and installation, as well as
careful operation and maintenance.
The inverter may only be operated by persons who have read
and understood the operating instructions.
Modifi cations
It is generally not permitted to modify the inverter. Always
consult an authorised electrician for modifi cations to the sur-
roundings of the inverter, as they are qualifi ed to undertake
such work.
Transportation
The inverter is subjected to extensive testing and inspection in
our test fi eld. Only by doing so can we ensure the high quality
of our products. Our inverters leave our factory in proper elec-
trical and mechanical condition. Special packaging ensures
safe and careful transportation. However, damage may still
occur during transport. The shipping company is responsible in
such cases.
Thoroughly inspect the inverter upon delivery. Immediately
notify the responsible shipping company if you discover any
damage to the packaging which indicates that the inverter
may have been damaged or if you discover any visible damage
to the inverter.
If necessary, your solar installer or KACO new energy GmbH
will assist you. Damage reports must be received by the ship-
ping company in writing within six days following receipt of
the goods.
When transporting the inverter, the original or equivalent
packaging is to be used, as this ensures safe transport.
3 Notes on Installation and
Operation
3.1 Intended use
The unit converts the DC voltage generated by the photovol-
taic (PV) modules into AC voltage and feeds this into the
power grid.
Powador inverters are built according to the state of the art
and recognised safety rules. Nevertheless, improper use may
cause lethal hazards for the operator or third parties, or may
result in damage to the units and other property.
The inverter may be operated only with a permanent connec-
tion to the public power grid.
The inverter is not intended for mobile use.
Any other or additional use is not considered the intended use.
The manufacturer/supplier is not liable for damage caused by
such unintended use. This risk is borne solely by the operator.
Intended use also includes adherence to the operating and
installation instructions. Your authorised electrician under-
takes the registration with your power supply company and
obtains approval for your photovoltaic system from the supply
grid operator on your behalf. Some of the documents that you
require in order to register your photovoltaic system and have
it approved are included in the installation instructions.
3.2
Factory warranty and liability
You will fi nd our warranty conditions on our website.
http://www.kaco-newenergy.com/service/warranty
From there, you can easily navigate to our international web-
sites by clicking on the appropriate fl ag.
Please use our website to register your unit within 24 months:
http://www.kaco-newenergy.com/service/warranty/
online-warranty-registration
On this page as well, you can click on the appropriate fl ag to
easily reach the website for your own nation.
In this manner, you can assist us in providing you with the
quickest service possible. In return, you receive two additional
years of warranty coverage for your unit.
Notice: The maximum length of the warranty is based on the
currently applicable national warranty conditions.
S e c t i o n 2 ·
S a f e t y I n s t r u c t i o n s a n d R e g u l a t i o n s
S e c t i o n 3 ·
N o t e s o n I n s t a l l a t i o n a n d O p e r a t i o n
D A N G E R
Danger due to lethal voltages.
Lethal voltages are present within the unit and
on the power supply lines. Therefore, only autho-
rised electricians may install and open the unit.
Even when the unit is disconnected, high contact
voltages may still be present within the unit.
Risk of damage due to improper modifi cations.
Never modify or manipulate the inverter or other
components of the system.