Kahuna LM7000 Instruction Manual - page 8
10
7
7
CHAIR INSTALLATION
1 ) Remove the carton.
2 ) Take out the packing material.
3 ) Install the Pillow, backrest cushion, cushion, spare parts.
4 ) The spare parts include: remote control, holder, user manual, wheel,
power cord.
1.Remove the package and get out the spare parts
2 ) Connecting the side plate trachea with the saddle lateral tracheal. the both
sides trachea must to insert the end, in order to prevent air leakage.
3 ) Aligning the side plate hole and the massage chair hole, then inserted the
plate into the corresponding side mount, To use screw driver lock-in screw,
fixed. The other side also completed according to the above mentioned.
4 ) After install the side board, please smooth the chair.
1 ) Remove the board from the carton,and take out the sideboard.
2.Install the side board
Iron plates inserted into the seat
frame at the relevant side seat
Air bag air tube
Lock screws
place
Lift upwards
Remove protective packing material
OPERATION GUIDE
: Press the button first, massage back and leg position to zero G1,
press second, the position to zero G2, press third, the position to
zero G3, press fourth, massage chair return to original position.
Zero G1 -> Zero G2 -> Zero G3 -> Original Position
: Press to temporarily pause the massage, chair will enter idle
mode. Press again to resume massage.
:
Start or Stop massage chair
Press this button, massage chair will be ON, screen will be ON,
User can choose auto or manual function to massage.
Press this button again, massage chair will be off, massage stopped,
massage chair will come back to the original position, all buttons are
inactive. When the chair returns to the original position the chair will
completely shut off.
1 Function description of Controller buttons.
PS:The position adjustment button have no function when the chair in the
stretch programe
Lock screws
place