KaiDeng PANTONMA K80 User Manual - page 9
1. Stretch the controller to adjust different size of phone.
2. Slide the phone to the pad of remote controller as the photo show.
Connection instruction:
1.Turn on the drone, the FPV indicate light blink slowly, which shows the
drone is ready to connect with phone.
2.Open your phone and into “settings” , turn on the WIFI, search the KD-
**** from the signal list, connect the signal, exit “setting” option until the
signal shows connected.
3.Open the PANTONMA APP, click “MY DRONE” into control interface. The
indicate light on the drone will on, which means is connected.The phone
shows the real time image. The wifi signal in full grid showing the strongest
signal.
-8-
Phone installation
*)39FRQQHFWLRQLQVWUXFWLRQ
&KDUJHWKH*)39PRQLWRU
Power Switch
Charging Slot
1.Connect the 5.8G camera module to the drone.
2.Turn on the drone and controller, as well as the 5.8G monitor, slide the
5.8G monitor to middle of the controller.
Insert the USB pin to the monitor and
connect the USB with adaptor or computer
to charge the monitor.