Kailing Electronic KLD Guitar AMP Uranus-5H(M) User Manual - page 4
2.
NORMAL/BRIGHT: (2)
Push for more bright sound
3.
LOW INPUT: (3)
The Input jack will accept signals from low impedance guitar pickups, Be sure to use a high-quality shielded cable to connect the guitar
to the amplifier
4
. HIGH INPUT: (4)
The Input jack will accept signals from high impedance guitar pickups, Be sure to use a high-quality shielded cable to connect the
guitar to the amplifier
5. GAIN: (5)
Preamp gain control
6
. REVERB ON/OFF: (6)
On/ OFF spring reverb .
7. REVERB: (7)
Reverberation is an echo effect. Rotate clockwise to increase the effect
8 BASS: (8)(EQ)
Passive tone controls that regulate high, mid, and low frequencies respectively
9. MIDDLE: (9)(EQ)
10. TREBLE: (10)(EQ)
11. BOOST SWITCH: (11)
“Boost”The overall system gain; Depress to the “in” position to activate
12. VOLUME: (12)
Controls amp volume
13. STANDY (13)
When you on the amp, open power switch first, after 30-60s, open standby. When you off the amp, close standby first, then close
power switch.