Kailing Electronic KLD Guitar AMP Uranus-5H(M) User Manual - page 5
14. LED OF STANDBY (14)
15. POWER SOCKET: (15)
16. POWER ON/OFF: (16)
17. PENTODE/TRIODE SW (17)
15w/7.5w power switch
18. SEND (18):(EXTERNAL)
Output sending signal to external effects or signal processing equipment.
19. RETURN: (19)(EXTERNAL)
Input returning signal from external effects or signal processing equipment
20. FOOT SWITCH :(20)(EXRERNAL)
Connected with the optional remote footswitch. Footswitch is used to select defeat reverb. When using remote foot switch, always
insert the plug fully (second click) to ensure proper operation
21.
DI OUTPUT : (21)
There is dummy load embedded into amp, so when you recording, you can only connect amp with DJ, don’t need connect cabinet
again.
22.OUTPUT : (22)
Provide for connection of external 8ohms speaker cabinet.