Kaiser Baas Pocket Charge 6K Quick Start Manual - Using The Pocket Charge
Using the Pocket Charge
6K
Please charge the Pocket Charge 6K to full capacity
before your first use.
To charge your digital
device
Connect the output port
2
of your Pocket Charge
6K to your device via a usb cable.
Press the On/Off switch one time to start charging
your device.
The LED Indicators should turn on.
Tip: Refer to the previous page for information on the charge
status
When charging a device you can toggle the LED
Indicators by pressing the On/Off Switch. You
cannot turn off the powerbank whilst it is charging.
Sleep Mode:
When the LED Indicators are off but your device is
charging this mode is called Sleep Mode.
To stop Charging simply disconnect your device
from the powerbank. The Powerbank will
automatically cut output within 1min.
Please note only a Micro USB to USB cable is
supplied.
LED Torch
To activate the Torch press and hold the On/Off
Switch
1
for 3 Seconds to turn on.
To deactivate the Torch press and hold the On/Off
Switch
1
for 3 seconds to turn off.