Kaiser Baas Pocket Charge 6K Quick Start Manual - Troubleshooting
Troubleshooting
Problems
Possible
Causes
Corrective
Actions
Unit has been
charg ing for
long time but
indicators
dont show full
capacity
1. Charging
time is not
enough
2. Adapter
output current
is too low
1. Ensure it has
been charging
for at least
6.5hours
2. Use the
original cable
and a certified
AC adapter
The Pocket
Charge 6K
can not fully
charge other
devices.
1. No power
or low power
left.
2. Failed input
cable and
connectors, or
connector is
incorrect.
1. Charge it
again.
2. Use another
output cable
and connector
or the orginal
device cable.
Pocket Charge
6K could not
charge device,
continuosly, or
intermittenly
charges
devices. Two
beeps may
happen.
1. Failed cable
or connector.
2. Low power
left.
3. Device may
need higher
input voltage
than available.
1. Use
another cable
or check
connector.
2. Charge it
again.
3. Please
don’t use the
device when
charging nor
charge your
device when it
has remaining
charge.