Kaiser Baas X80 User Manual - page 10
16
17
USING YOUR X80 CAMERA
Preparation
Charging the battery
Before using the X80 camera for the first time you should fully
charge the battery.
Procedure:
1. Connect X80 camera to a computer (or other USB power
source) using the USB cable (provided)
2. The red lights on the X80 camera (3 lights) will blink until the
battery is fully charged.
3. A completely flat battery will take about 5 hours to be fully
charged.
USING YOUR X80 CAMERA
Preparation
Insert the Micro SD*
It is recommended to use Class 4 (or higher) TF card to shoot
smooth video files. Lower class cards may cause the video to
blur or be jerky.
* Micro SD cards are also called TF cards.
There is only one correct direction to insert the Micro SD (TF)
card into the slot. Do not force the card into the card slot, as it
may damage both the camera and the card.
It is recommended to format new cards or cards that have been
previously used in other cameras. To format the Micro SD card:
1. From preview mode press POWER button once to enter the
menu
2. Select: Setup more > Format > Format
Note: formatting the card will permanently delete the
contents.