Kaiser Baas X80 User Manual - page 7
10
11
SETUP YOUR X80 CAMERA
Picture mode
Navigate menu to set Resolution, Date Watermark, White Balance
Resolution
Date Watermark
White Balance
Exit
Picture Setup
Navigate: Power
Confirm: Shoot
Note: Use POWER button
to navigate, SHOOT button
to select.
Notes:
1. Resolution: the higher the resolution the larger the file size.
2. White Balance: factory default is Auto. If you switch Auto
OFF remember to adjust when lighting conditions change.
3. Date Watermark: if selected, the date will appear on the
bottom left corner of the screen.
SETUP YOUR X80 CAMERA
Video mode
Navigate menu to set Resolution, White Balance, Microphone
and Video Looping.
Resolution
White Balance
Microphone
Video Looping
Video Setup
Navigate: Power
Confirm: Shoot
Note:
Use POWER button to
navigate, SHOOT button
to select.
Notes:
1. Resolution: 1080p @ 30fps,
720p @ 60fps and VGA @
120fps are supported
2. White Balance: factory default
is Auto. If you switch Auto OFF,
remember to adjust when lighting
conditions change.
3. Microphone: SELECT ON to
record audio, SELECT OFF for
video only.
4. Video Looping: if OFF, the camera will record files up to 20min
long before starting a new file. In this mode, the X80 will
continue to record this way until the memory is full. If 2min or
5min are selected the camera will record files either 2min or
5min long. The camera will record a series of consecutive files.