KAM K-Strip6 Instruction Manual - page 4
DMX operation
DMX address setting
When controlling the unit (or units) with a DMX controller, each one must be set with a specific DMX address. You can choose to
set all units with the same DMX address or you can set every unit with its own DMX address.
If all units are set with the same DMX address, they will receive DMX signal from this DMX address. If operated in this way, all
units will operate in the same way, you cannot control each unit separately.
If you set every unit with a different DMX address, they will receive the DMX signal from their own DMX address. You will now be
able to control each unit individually. The DMX address that you set for each unit must be determined by the number of channels.
This unit has 3, 7 or 18 channels, therefore if you choose the 3 channel mode, you should set the starting address of the first unit
to 1, the second unit must then be set to 4 (3+1), the third unit must be set to 7 (3+4) and so on. If you choose the 7 channel
mode, you should set the starting address of the first unit to 1, the second unit must then be set to 8 (7+1), the third unit must be
set to 15 (7+8) and so on. If you choose the 18 channel mode, you should set the starting address of the first unit to 1, the second
unit must then be set to 19 (18+1), the third unit must be set to 37 (36+1) and so on.
Menu display
Function
Addr
DMX address setting. This is changed using the Up or Down arrow buttons.
CHNd
3CH - press the Enter button to choose 3 channel DMX operation.
7CH - press the Enter button to choose 7 channel DMX operation.
18CH - press the Enter button to choose 18 channel DMX operation.
NAnu
rEd - press the Enter button / 0-255 red dimmer.
GrEE - press the Enter button / 0-255 green dimmer.
bLUE - press the Enter button / 0-255 blue dimmer.
SHOU
SH1 – SH14. Built-in shows.
COLO
CO1 - CO7. Manual colour selection.
SPEE
Auto speed setting from 01-99.
Auto
Auto mode.
Soun
Sound-to-Light mode.
Temp
The LED starts declining in power at 70°C and adjust the brightness automatically.
At 100°C the LEDs will shut down until the unit has cooled down.
Ve1.0
Software version Ve1.0
DMX channels
Value
Function
3 channel
7 channel
18 channel
-
CH1
-
0-255
Dimmer
CH1
CH2
1 / 4 / 7 / 10 / 13 / 16
0-255
Red dimmer
CH2
CH3
2 / 5 / 8 / 11 / 14 / 17
0-255
Green dimmer
CH3
CH4
3 / 6 / 9 / 12 / 15 / 18
0-255
Blue dimmer
-
CH5
-
0-255
Strobe
-
CH6
-
0-10
Black out
-
11-240
Single effect built-in program in Auto mode
-
241-250
Built-in program in Sound-to-Light mode
-
251-255
Mixed effect built-in programs in Auto mode
-
CH7
-
0-255
Speed