1. DL manuals
  2. KAM
  3. Lighting Equipment
  4. Kam iLink Blue 500
  5. Instruction Manual

KAM Kam iLink Blue 500 Instruction Manual

Summary of Kam iLink Blue 500

  • Page 2

    Thank you for purchasing this kam product, we are sure that it will serve you for many years to come. To optimise the performance of this product, please read these operating instructions carefully to familiarise yourself with the basic operations of this unit. Please retain them for future referenc...

  • Page 3

    Front and rear panels 1 power led indicates that the fixture is switched on 2 music led synchronises to any detected music/sound signal 3 remote receiver remote controller signal receiver 4 power switch use to power on or off the unit 5 fuse holder the replaceable fuse is held here 6 mains power pow...

  • Page 4

    Control and function regular breaks during operation are essential to maximise the life of this device as it is not designed for continual use. Always unplug the unit when it is not being used for long periods or before servicing. In the event of serious operation problems, stop using the unit and c...

  • Page 5

    Sound-to-light / microphone sensitivity setting 1 press the function button (func) to enter mode options 2 press the function button until the led panel shows s 6 3 press the up or down buttons to adjust the microphone sensitivity 4 s 1 = low sensitivity / s 9 = high sensitivity / s 0 = mic is turne...

  • Page 6

    Dmx protocol for one colour lasers channel value function channel 1 - mode 000-063 laser black out 064-127 auto show 128-191 sound activated show (music) 192-255 dmx mode (other channels activated) channel 2 - patterns 000-255 32 patterns as shown in pattern list (see below) channel 3 - zooming 000-...

  • Page 7

    Dmx protocol for multi colour lasers channel value function channel 1 - mode 000-029 automatic show with original preprogrammed colour 030-059 auto show with colour 1 060-089 auto show with colour 2 090-119 auto show with colour 3 120-149 sound activated show with original preprogrammed colour 150-1...

  • Page 8

    Pattern list in channel 2 specifications kam ilink blue 500 490mw 450nm blue kam ilink rgy 100mw red / 40mw green colour mixed to yellow kam ilink rbp 100mw red / 80mw blue colour mixed to pink kam ilink gbc 40mw green / 80mw blue colour mixed to cyan mains input/total power ac100-240v, 50/60hz / 12...