KAM Kam iLink Blue 500 Instruction Manual - page 4
Control and function
Regular breaks during operation are essential to maximise the life of this device as it is not designed for continual
use. Always unplug the unit when it is not being used for long periods or before servicing. In the event of serious
operation problems, stop using the unit and contact your dealer immediately. Note: There will output from the laser
5 seconds after the unit is powered on.
Operation (via control buttons on rear of unit)
Single colour Kam iLink lasers
Three colour Kam iLink lasers
Auto Show / Stand Alone mode (Aut)
1 Press the function button (Func) to enter Mode options
2 Press the function button until the LED panel shows Aut
3 Press the Enter button to confirm the setting
The laser will now be working in Auto Show / Stand Alone mode
Sound Activated / Sound-to-Light / Stand Alone mode (Sou)
1 Press the function button (Func) to enter Mode options
2 Press the function button until the LED panel shows Sou
3 Press the Enter button to confirm the setting
The laser will now be working in Sound Activated / Sound-to-Light / Stand Alone mode