KAM KMD20 Instruction Manual - page 5

4 

B: Master Section 

(16), (17),STEREO RECORDER &PHONO JACK 

(16), these jacks can be connected with cassette cleek. When 

playing backrecorded. 

(17), these jack are can be connected with cassette cleek. 

When recording the MIXED output. 

(18), (19), (22), (23) LINE IN 

(18) line in for channel 7/8      (19) line in for channel 9/10. 

(22) line in for channel 11/12    (23) line in for channel 13/14. 

(20) CTRL ROOM OUT 

(21) MAIN OUT 

The output signal can be connected with the external main 

speaker and amplifier. 

(24) HI MID 

Adjusting the knob, you can have up to 15dB cut and boost at 

3KHz mid and hi frequency. 

(25) LO MID 

Adjusting the knob, it have up to 15dB cut and boost at 500Hz 

mid and low frequency. 

(26) EFX PROCESSOR DIRECT IN 

The external signals can be connected with the DSP input 

(27) AUX SEND 

Aux signal output jack 

(28) EFX SEND 

FX signal output jack 

(29) AUX RETURN 

AUX output signal return jack 

(30) EFX RETURN 

FX output signal return jack 

(31) HEAD PHONE JACK                                                                                                                  (STEREO CHANNEL) 

You can monitor the working condition by phone. You can also monitor the master sound and a certain channel. 

(32) FOOT SWITCH