KAM KMH SERIES Instruction Manual - page 6
Important note on DMX addresses
When assigning separate DMX address to different moving heads, there needs to be ‘separation’ between each number of the
DMX addresses chosen. For example, in 9 channel DMX mode, there needs to be 9 digit difference between the first head’s DMX
address and the second head’s DMX address and then another 9 digit difference between the second head and the third head.
This changes to a 13 digit gap needed when operating in 13 channel DMX mode. The tables below should give you a guide to
DMX address setting.
DMX address setting in 9 Channel mode
Unit/head
DMX address
1
001
2
010
3
019
4
028
5
037
6
046
7
055
and so on
Add 9
DMX address setting in 13 Channel mode
Unit/head
DMX address
1
001
2
014
3
027
4
040
5
053
6
066
7
079
and so on
Add 13