KAM KSD2 Instruction Manual - page 5
16. SD PORT
Insert a SD card.
17. USB PORT
Insert a USB memory stick.
18. BASS EQ
This adjusts the bass frequency level of the output signal (left hand set of controls for channel 1 / right hand side
controls for channel 2).
19. MIDDLE EQ
This adjusts the mid frequency level of the output signal (left hand set of controls for channel 1 / right hand side
controls for channel 2).
20. TREBLE EQ
This adjusts the high frequency level of the output signal (left hand set of controls for channel 1 / right hand side
controls for channel 2).
21. INPUT TOGGLE SWITCH
Selects which source will be live to that channel based on what you have connected to the rear panel input
section. In left position SD/USB in right position LINE/PHONO are active.
22. GAIN CONTROL
The left gain control adjusts the gain level of channel 1,the right gain control adjusts the gain level of channel 2.
23. MASTER LEVEL
Adjusts the main master level output.
24. SD/USB BUTTON
Press once: to read from the SD card
Press again: to read from the USB
Press and hold, display P-OFF and will shut off the power for SD card/USB.
Pressing the button again, will start up the SD/USB.
25. FOLDER/TRACK
Press the folder / track button.
When the button is illuminated the unit is in FOLDER mode, by using the << or >> buttons, you can choose
the folder you wish to access on your memory device.
Press the folder / track button illumination goes out the unit is in TRACK mode press the <
to skip through and select tracks.
26. >>
In FOLDER mode >> searches forward through the saved folders on your memory device.
27. <<
In FOLDER mode << searches backwards through the saved folders on your memory device.
In TRACK mode, >> searches forward through the saved tracks on your memory device.
In TRACK mode, << searches backwards through the saved tracks on your memory device.
28. CONT / SINGLE / ROBO BUTTON
In single ROBO mode, pressing the left hand side play/pause button will start the playback of side A if the
cross fader is set in the centre position and both line faders are set at the required level, the unit will play
the track on side A and when finished will automatically start playback on side B this acts as a relay play
(ideal for constant play background music).
In continue ROBO mode, pressing the left hand side play/pause button will start the playback of side A if the cross
5
Kam KSD2 manual 2.qxp:Layout 1 24/7/08 16:12 Page 5