KAM KSD2 Instruction Manual - page 7
On unit 1, pressing ROBO button activates the SINGLE function;
On unit 2, keeping the CONTINUOUS function.
When the SINGLE function causes the unit 1 to play one song and then stop and the CONTINUOUS function causing
the unit 2 to play continuously.
When the unit 1 and unit 2 keep the CONTINUOUS function, when the one unit play the CD to the end and the other
unit play continously.
Pressing the ROBO button a second time activates the ROBO function, starting function causing the unit to
altermate play between two CDs using both sides.
42. JOG & SHUTTLE WHEELS
Shuttle: Use the dial to select the scanning direction and speed. The disc is scanned in the forward direction when
the shuttle dial is turned clockwise from the neutral position, in the reverse direction when the shuttle dial is turned
counterclockwise. The scanning speeds up when the shuttle dial is turned faster.
Jog: In pause mode, if you turn the jog wheel, the point at which the sound is being produced moves by a number
of frames corresponding to the number of clicks. Clockwise moves the point forward; counterclockwise moves the
point backward. In play mode, the jog increases or decreases the speed of the song. (clockwise : increase,
counterclockwise : decrease).
43. INPUT FADER
Controls individual source levels.
44. LED METER
Indicates the master output level.
45. REPLACEABLE CROSSFADER
Controls the output signal between the two input channels. Hard left selects channel 1. Hard right selects channel
2. With the crossfader centered, both assigned channels are live. Use the crossfader for fast and seamless cuts
from one selected channel to the other.
7
Kam KSD2 manual 2.qxp:Layout 1 24/7/08 16:12 Page 7