KAM KWD220 HH Instruction Manual

Summary of KWD220 HH

  • Page 1

    M a d e i n c h i n a due to continuous product development, please ensure that you have downloaded the latest instruction manual for this product from the kam website at www.Kam.Co.Uk m a n u a l v e r s i o n 1 . 0 0 1 / 0 6 / 1 2 for the latest updates and information on the entire kam range visi...

  • Page 2

    Thank you for purchasing this kam product, we are sure that it will serve you for many years to come. To optimise the performance of this product, please read these operating instructions carefully to familiarise yourself with the basic operations of this unit. Please retain them for future referenc...

  • Page 3

    Before use the handheld microphones requires 2 x aa batteries in each microphone. Please use quality branded batteries for the best results. Ensure the batteries are fitted correctly and that the polarity is correct. The battery led will flash when the battery power level is low. Place the reciever ...

  • Page 4

    Dipswitches 2406mhz/ 2408mhz/ 2410mhz/ 2450mhz/ 2414mhz/ 2416mhz/ 2418mhz/ 2420mhz/ 2446mhz/ 2448mhz/ 2450mhz/ 2452mhz/ 2454mhz/ 2456mhz/ 2458mhz/ 2460mhz/ 2422mhz/ 2424mhz/ 2426mhz/ 2428mhz/ 2430mhz/ 2432mhz/ 2434mhz/ 2404mhz/ 2462mhz/ 2464mhz/ 2466mhz/ 2468mhz/ 2470mhz/ 2472mhz/ 2474mhz/ 2444mhz/ ...

  • Page 5

    Pairing microphones to your reciever important - please read the instructions fully before you start pairing there is a time limit to pair the microphone, if the pairing led does not illuminate (either flashing or static) turn the handheld microphone off, then press and hold the pairing button to st...

  • Page 6

    Specifications receiver frequency: 2404-2476mhz built-in act system 16 preset channels dynamic range: 85db total harmonic distortion: 0.1% frequency response: 40hz-15khz±3db audio output level: 0±450mv range: 30m optimal line of sight twin aerials signal to noise ratio: more than 90db receiving sens...