KAM Laserscan Hyper 3D Instruction Manual - page 5
sFront and rear panel controls and function
Number Feature
Function
1
Power indicator LED
Illuminates red when the unit is turned on to show the unit is powered up.
2
Sound indicator LED
Flashes when an audio signal is received by the built-in microphone for reference.
3
Laser output aperture The laser light is emmited from here. Never look directly into the hole when the unit is on.
4
Handle bracket
Adjustable handle for carrying the unit and for mounting.
Number Feature
Function
5
Power switch
Turns the unit on or off when connected to the mains power supply
6
Power supply input
Attach the mains cable here. Built-in fuse and spare fuse
7
DMX input
3 pin XLR connector for DMX communication
8
DMX output
3 pin XLR connector for DMX communication
9
ILDA input
Standard ILDA interface. Automatically switches between the internal program and ILDA
10
ILDA through
Standard ILDA interface. Used to connect to other ILDA lasers
11
Cooling fan
Cooling fan output. Do not cover
12
Safety chain eyelet
Attach safety chain to this eyelet when mounting the unit
13
Control panel
LED panel featuring menu display and four button control
14
Remote connect
Safety connector used to turn the unit of immediately
15
Key lock switch
Even when powered up, the unit will not operate without the key inserted and turned to on