1. DL manuals
  2. KAM
  3. Lighting Equipment
  4. LED PARBAR MKIII
  5. Instruction Manual

KAM LED PARBAR MKIII Instruction Manual

Summary of LED PARBAR MKIII

  • Page 1

    Led parbar mkiii portable all-in-one dmx led lighting rig portable all-in-one dmx led lighting rig for all performers from live bands to djs! Sound-to-light with built-in programs stand-alone operation for solo performance fully 512 dmx compatible 15 x dmx channel operation t-bar incorporates built-...

  • Page 2

    Thank you for purchasing this product, we are sure that it will serve you for many years to come. To optimise the performance of this product, please read these operating instructions carefully to familiarise yourself with the basic operations of this unit. After you have read the instructions, plea...

  • Page 3

    Modes 1. Sound mode – outputs built-in programs from the parbar in time with the music. Activated via the built-in microphone and adjusted via the onboard sensitivity control. 2. Auto mode – outputs built-in programs from the parbar at a set speed or delay. Activated and set via the onboard controll...

  • Page 4

    Auto mode: has 12 patterns in this mode, ap01-ap12 and you can set the speed for each pattern chase. Manual mode: for colour mixing you can set the intensity of the red, blue and green. You can also set the strobe speed manually. Sound mode: you can select the 4 sound modes, sp03 means rgb on/off, s...

  • Page 5

    Dmx channel data please note - the dmx function will only work if ch1 is set to dmx mode, which is set by adjusting the dmx fader value below 009 and the dmx fade function (ch2) is set to light output level above 0% or dmx fader value greater than 1. Please locate ch1 position the fader greater than...

  • Page 6

    Operation description of the stand-alone mode stand alone mode is with no dmx controller or footswitch attached. Stand-alone: sound/auto/manual. Auto mode “ap01-ap12”: has 12 patterns in this mode. Select ap01-ap12 and you can set the speed for each pattern. Sound mode “soun”: sp03 means rgb on, sp0...