KAM LED PARBAR MKIII Instruction Manual - page 6
Operation description of the Stand-Alone mode
Stand alone mode is with no DMX controller or footswitch attached.
Stand-alone: sound/auto/manual.
Auto mode “AP01-AP12”: Has 12 patterns in this mode. Select AP01-AP12 and you can set the speed for each
pattern.
Sound mode “SOUN”: SP03 means RGB on, SP02 means color mixing changing, SP01 means 7-single color
changing and SPOO means RGB changing.
Sound mode: Adjust the sensitivity knob.
Operation description of the Master/Slave operation
Master/slave operation is linking more than 1 LED parbar together.
Master/slave mode: sound/auto/manual, no controller needed.
Set working mode: set one of them as master unit (sound/auto/manual), and set the rest in DMX mode, set DMX
address as A001. When controlling the LED parbar with OBEY3, please set each unit‟s working mode as OBEY3.