KAM TextBeam300 Instruction Manual - page 9
Remote control operation
Choose IR mode on laser unit
1. Press the Menu button on the rear of the laser unit to enter mode options.
2. Select the System settings (SYS), then choose irEn.
3. Ensure that the On option is selected, then press the Enter button to confirm the setting.
A. On/Off button Press button to unit on or off (blackout).
B. Sound button Press button to activate Sound-to-Light mode. The unit will play Sound-to-Light Auto shows randomly.
Press the button again to change shows.
To adjust the mic sensitivity, press Music button for 2 seconds. Use the 1-9 numeric buttons to increase or decrease sensitivity.
9 is the highest sensitivity.
C. Auto button Press button to activate Auto mode. The unit will play Auto shows. Press the button again to change shows.
D. & E. Colour buttons Press buttons to cycle through laser’s available colours.
F. Pause button Press button to pause the laser effect.
G. Mode buttons – Time / Countdown / Text
Press the A buttononceto enter Time mode.
Press the A buttonagainto cycle between Year, Month, Day, Week and Time.
Press the A buttonfor two seconds to enter into Time adjust mode. When the number flickers, press one of the numeric buttons
(H) to change the value. Use the D/E buttons to move on to the next digit. Press the A button to save your changes.
Press the B buttononceto enter Countdown mode.
Press the B buttonfor 2 seconds, you can then adjust the value by 1-9, then press the B button to start counting down.
Press the Pause button (E) to stop the Countdown.
Press the C buttononceto enter Text mode.
Press one of the numeric buttons (H) to save the text.
H. Use the 0-9 numeric buttons for single number and double number settings.
I. Pressing this key activates the Mirror adjustment. Each time you press it, the mirror direction changes. When you have it the
way you wish, discontinue pressing the button.
Any or setting will be saved in RAM, until the unit is turned off.