Kamado Joe Grill Owner's Manual - Kamado Joe Components
2
KAMAdO JOE COMPONENtS
Unpacking & Assembly of Your Kamado Joe
1. Remove your Kamado Joe Cooker from the box.
2. Remove all parts within the Kamado Joe Cooker in order to remove any
cardboard or Styrofoam packing material.
3. After removing all packing material from the parts, replace the parts
back inside unit as shown in diagram 1.
A. Place the fire box into the base of the cooker making sure that the
opening at the bottom of the fire box aligns with the draft door.
B. Place the cast iron fire grate in the bottom of the firebox.
C. Place the fire ring on top of the fire box making sure that the notches
face upwards.
D. Place the stainless steel cooking grid on top of the fire ring.
FIRE BOX
BASE
LID
TEMP
GAUGE
CAST IRON
FIRE GRATE
FIRE RING
STAINLESS
STEEL GRATE
SPRING
HINGE
BAMBOO
HANDLE
CAST IRON
TOP VENT
STAINLESS
STEEL DRAFT
DOOR