Kanaan KN40543 User Manual - Connection And Operation
Maximum band width
up to 340MHz
Maximum data throughput
10.2 Gbps
Input/Output voltage TMDS
0.5~1V p-p
Input/Output voltage DDC
5V p-p (TTL)
Maximum cable length input
15m (AWG 24)
Maximum cable length output
25m (AWG 24)
Maximum current consumption
1300 mA
Weight
380 g
CONNECTION AND OPERATION
Step 1: Connect your devices and displays to the KanaaN Matrix Switch. Please note,
that the separate audio out will only transmit audio from HDMI out A. HDMI input 1 is the
only one to process MHL signals from smartphones etc.
Step 2: Switch all devices on, including the matrix switch.
Step 3: Choose the right combination of inputs and outputs with the remote control (pull
plastic flap out first) or directly at the switch. As soon as the connection is established,
the LEDs of the inputs and outputs will glow.
Step 4: If you have connected an amplifier to the matrix switch, you can adjust the audio
output according to your wishes via the "audio" button. Please note, the the analogue
output can only do stereo. If 5.1CH is adjusted sound will be put out incompletely. Via the
ARC key you can activate the audio back channel, to e.g. provide amplifiers with a HDMI
input with audio signals. You can choose the required output (digital / analogue /
advanced audio) with the SPDIF key.
Note: For the protection of the switch and other devices, please make sure, that the
switch is switched off before connecting the other devices. Please insert and extract all
cables gently.
4