Kanaan KN40543 User Manual - Trouble Shooting
TROUBLE SHOOTING
Please check the connection carefully before turning on the device. Please make sure,
that all cables are connected properly and the channels are switched on according to the
connected cables.
Problem
Possible Cause/Possible Solution
No image
Is the power LED on? (check power supply)
Are the channels correctly adjusted? (check
configuration)
Do both devices support the output format? (choose the
lower one if not)
Is the cable quality sufficient? (use shorter/better
protected cables)
No audio
Audio out correctly adjusted? (change with SPDIF key
until correct output is found)
Is the audio format supported? (if necessary, check your
audio device for the format); analogue: stereo PCM,
digital: PCM, Dolby 5.1
Audio can just be put out separately at output A.If
necessary, change output.
Audio and image
troubles
Are the used cables of poor quality or maybe too long?
Are input device and output device compatible with each
other?
Are the plugs correctly connected?
If you choose to use two output devices (splitting)
problems may occur if the resolutions are different.
Check power supply. If necessary, choose another wall
outlet.
7