Kandolite KSL1W9 User Manual - page 7
2.
Press ENTER to access the further menu setting. This process can be saved
automatically; that means you will enter the process saved previously
when you activate the light next time. For example, if you want to choose
DMX mode A001, operate as follows:
• Press MENU, go back to the initial setting
• Press UP / DOWN until Addr
• Press ENTER to choose, the display will glinting at this moment
• Press UP / DOWN to change the address code to select A001
• Press ENTER to select and store the current menu options. DMX mode
will be
• Stored automatically and the screen will stop glinting.
3. Details of program built inside
(Pr- -)
• Press MENU, go back to the initial setting
• Press UP / DOWN until Pr--
• Press ENTER to choose, the display will glinting at this moment
• Press UP / DOWN to change the address code to select pr00
• Press ENTER to select and store the current menu options. DMX mode
will be
• Stored automatically and the screen will stop glinting.
• Pr00:red; Pr01:green Pr02:blue
• Pr03:amber Pr04:cyan Pr05:purple
• Pr06:white;
Pr07:red+strobe;
Pr08:green+strobe
• Pr09:blue+strobe;
Pr10:amber+strobe;
• Pr11:cyan+strobe
• Pr12:purple+strobe; Pr13:white+strobe;
• Pr14:RGB jumping change; Pr15: 7 colors jumping change;
Note
:
Pr7--- Pr15 Can change the content Of SP
,correct the speed of jumping
change , SP00 is the fastest
,SP15 is the slowest