KanexPro EXT-HDBASE70E Manual - 1. Introduction
KANEXPRO
EXT-HDBASE70E
1
1. Introduction
1.1
Introduction to HDBaseT Extender Set
The KanexPro EXT-HDBASE70E is a 4K ready transmitter-receiver set made to extend
Ultra HD 4K, digital audio, wide-band IR and power over Ethernet (PoE) over a cost
effective cat6 cable. Supports computer resolutions up to 1920x1200, HD1080P/60 with
Deep Color. This HDCP compliant extender routes distances up to 230 feet using
HDBaseT™ Lite technology.
Ideal for digital signage applications or routing uncompressed HDMI A/V signals over
inexpensive CATx in boardrooms, conference rooms and classrooms for far-end
projectors.
1.2
Features
Extend uncompressed HDMI A/V signals over Single CAT6
Extend up to 70 meters (230 feet)
POE supported on the receiver side
Supports 4K UHD resolutions
Supports HDMI 1.4, 3D, and full HD 1080p/60
HDCP & EDID compliant
CEC Pass-through
Bi-directional IR control
High bandwidth up to 10.2 Gbps
Compatible with our HDMMX modular matrix switchers
One locking power supply included
Aluminum case enclosure with separate mounting ears
Ultra-compact receivers are easy to install and hide behind the TV or
projector, putting the design as the top priority.
Note
: Please use a CAT5e cable with low impedance (Shielded twisted pair will be
better and should be well grounded
)
for good transmission effect.
1.3
Package List
1 x HDBaseT Extender Set (including TX and RX)