KanexPro HDSC12D Manual - 9. Firmware Updating
HDSC12D
16
Mute Off
0722%
MUTE MIC
MIC Mute On
0723%
UnMute MIC
MIC Mute Off
0724%
MIC volume turn up
MIC Volume: XX
0725%
MIC volume turn down
MIC Volume: XX
08XX%
Preset MIC volume.
The XX is ranging from 00 to 99
MIC Volume: XX
9. Firmware Updating
The HDSC12D supports firmware field updating, by USB flash disk.
The Operation is:
1: Copy the file “MT23ATV.bin” to a USB flash disk.
2: Plug the USB flash disk to the USB port on HDSC12D.
3: Pressing the button “HDMI” on the front panel for 6 seconds or sending RS232 command 0698%
for updating, then press the button “OK” on the remote or send RS232 command 0609% to
confirm update. The HDSC12D will capture the new firmware from USB flash disk.
4:
After updating finish, reboot and send the command “0617%” to reset to factory settings.
5: After reset, reboot again.
Notice: The name of the update file must be MT23ATV.bin.