KanexPro HDSC61D-4K User manual - 4. System Operations
Compact Scaler Switcher 6x1
5
education, command & control center and smart home etc.
4. System Operations
4.1 Front Panel Button Control
Front panel buttons can be used for source selections, output resolution adjusting, front
panel buttons management, software updating and output screen setting. (Please refer
to chapter 2.1).
Here is the detail information for source selections:
There are 6 sources for choose in total, including HDMI1, HDMI2, HDMI3, HDMI4,
VGA1, VGA2. Video signals support auto-switching and manual switching (factory
default). Press and hold for SOURCE/AUTO for 3 seconds or more to enter in
auto-switching/ manual-switching mode.
Manual-switching:
Dial ◀
to select the previous source, dial ▶ to select the next source.
Auto-switching:
In this mode, select input source via front panel button (◀
▶) is not available, but RS232
command and IR remote are able to switch mode. The auto LED turns green and keeps
on.
The auto-switching mode abides by the following principles:
l
New input principle
Once detecting a new input signal, Compact Scaler Switcher would switch to this new
signal automatically.
l
Rebooting device principle
Compact Scaler Switcher has the ability of power-off memory. If the last switching mode
is auto-switching, once rebooted, Compact Scaler Switcher will automatically enter
auto-switching mode, and then detect all inputs and memorize their connection status
for future rebooting using. If the last displayed signal is still available, Compact Scaler
Switcher will output the signal. If not, the unit will detect all the inputs signals with priority
from HDMI1 to VGA2. When detected the first signal, it will transfer to output.
l
Signal removing principle
Once removing the current display signal, Compact Scaler Switcher will detect all input
signals with priority from HDMI1 to VGA2. It will transfer the signal firstly detected to be
available to output devices