KanexPro SP-HDCAT1X8 User manual - page 3
SP-HDCAT1X8
2 |
P a g e
Introduction:
The KanexPro SP-HDCAT1X8 is a one transmitter and eight extenders - receiver set that enables high resolution
1080p HDMI signals to be routed over distances up to 394ft.(120m) significantly beyond the capability of standard
HDMI connectivity. When connected using installer friendly CAT5e/6 cables, the transmitter inputs the HDMI signal
into eight identical outputs carrying 394 ft./1080p resolution simultaneously from the provided receivers. For control
options, the 1x8 splitter comes with IR receivers for each of the receivers and provides IR pass-back function to
control the HDMI source device remotely from the displays.
This HDMI amplifier offers an ideal, cost effective means for extending digital video, multichannel audio, and control
signals using IR from HDMI equipped devices. Each receiver works with the splitter as a full functional unit enabling
full 1920 x 1080p/60Hz resolution.
Applications:
Perfect for house of worship centers, retail stores and residential /smart home theater applications where one HDMI
device can be distributed to eight displays over a single network cable up to 394 ft. without losing signal integrity.
Important Safety Notes:
1. Do not plug-in/out the network cables and IR cables when in use.
2. Use DC12V only. Make sure that the power specification is matched if using 3
rd
party DC adapters.
Features:
Support 1 HDMI input to 8 HDMI outputs (one HDMI device to 8-displays)
Up to 120 meters’ transmission distance over single cat6 (high quality cable can reach 150meters)
Compatible with the receiver device which supports HDBitT transport protocol
Compatible with HDCP1.4
Metal housing and mountable design
IR control inclusive