KanexPro SW-4X1SL18G User manual - 5. Ir Control
Manual is about: Switch with 4K UHD, ARC, IR, RS-232
Version: SW-4X1SL18G_2016V1.0
of
21
KANEXPRO
SW-4X1SL18G
11 |
P a g e
5. IR Control
Connect an IR receiver to the IR IN port. The SW-4X1SL18G can be controlled via the
included IR Remote. As CEC function, it is able to use the IR Remote to control the
source or display device. Here is a brief introduction about the IR Remote:
NOTE: The source and display devices should support CEC when the IR Remote is
used for controlling them.
INPUTS:
1~4: Select video source via pressing corresponding
button.
MANUAL/AUTO: Select Manual switching mode or
auto-switching mode.
SOURCE:
These buttons are designed to control input source
device (e.g. Blu-Ray DVD).
DISPLAY:
These buttons are designed to control output display
device (e.g. HDTV).