KanexPro SW-4X1SL18G User manual - page 13
Manual is about: Switch with 4K UHD, ARC, IR, RS-232
Version: SW-4X1SL18G_2016V1.0
of
21
KANEXPRO
SW-4X1SL18G
13 |
P a g e
6.3
RS232 Commands
6.3.1
Switching Commands
Function
Command
Feedback Example
Switch to HDMI input 1.
HDMI1%
[CMD]: switch to HDMI1.
Switch to HDMI input 2.
HDMI2%
[CMD]: switch to HDMI2.
Switch to HDMI input 3.
HDMI3%
[CMD]: switch to HDMI3.
Switch to HDMI input 4.
HDMI4%
[CMD]: switch to HDMI4.
Enable auto-switching mode.
AUTO%
[CMD]: switch to AUTO
Mode.
Enable manual switching mode.
MANUAL%
[CMD]: switch to MANUAL
Mode.
NOTE: The source and display devices should support CEC.
Parameter Configuration area
Monitoring area, indicates
whether the command
sent works.
Command Sending area
Monitoring area, indicates
whether the command
sent works.
Command Sending area