KanexPro SW-HD4X24K User Manual - 5.1 Front Panel
Weight
750 g
Chassis Material
Metal
Silkscreen Color
Black
Operating Temperature
0 °C~40 °C/ 32 °F~104 °F
Storage Temperature
−20 °C ~ 60 °C/−4 °F ~140 °F
Relative Humidity
20~90 % RH (non-‐condensing)
Power Consumption
2.0 W
5.
Operation and Functions
5.1 Front panel
1.
ON/OFF:
Power on/off switch.
2.
POWER LED:
This red LED illuminates when the device is connected with power
supply.
3.
IR:
Remote control receiver window.
4.
OUT A:
These red LED illuminates when the output A channel select to the
corresponding input.
5.
OUT B:
These red LED illuminates when the output B channel select to the
corresponding input.
6.
ARC:
Press this button to select OUT A or OUT B Coaxial audio from source or HDTV.
ARC function: If you need use ARC, your HDTV must support this function, when you open
the ARC function, the Coaxial of the matrix will output the HDTV current display content
audio. Otherwise will output the matrix input source audio.
7.
RST BUTTON:
Press this button the matrix setting will recover to factory state.
5.2 Rear panel
1.
RS232:
Connect the RS232 port to the PC or notebook by RS232 Cable to control the
matrix.
2.
Input:
This slot is where you connect the HDMI source output from Blu-‐ray, PS4,
Set-‐top Box or a laptop.
3.
IR TX:
Connect the IR Blaster cable included in the package for IR signal transmission.
Pace the IR blaster in direct line-‐of-‐sight of the equipment to be controlled.