KanexPro SW-HD4X24K User Manual - Remote Control
IR BLASTER (TX)
To control the source
:
Plug IR Blaster into IR TX port of transmitter unit; place blaster in
front of the IR eye of the source.
IR RECEIVER (RX)
To control the source
:
Plug IR Receiver into IR RX port of receiver unit; place receiver at
or near display.
6.
Remote Control
OUTPUT A:
Press IN1\IN2\IN3\IN4 button will fast switch to select
input source to HDMI OUTPUT A, and the LED will indicate the
corresponding input source. Press
button OUTPUT A will cycle
from input IN1\IN2\IN3\IN4.
OUTPUT B:
Press IN1\IN2\IN3\IN4 button will fast switch to select
input source to HDMI OUTPUT B, and the LED will indicate the
corresponding input source. Press
button OUTPUT B will cycle
from input IN1\IN2\IN3\IN4.