KanexPro SW-HD4X24K User Manual - page 3
2
SW-HD4X24K Matrix Switcher
IV. Specifications
Frequency Bandwidth
2.97Gbps
Input Ports
6 x HDMI Female.
Output ports
2 x HDMI Female; 1x Toslink; 1x Earphone
HDMI Audio Output
PCM2, 5.1, 7.1CH, Dolby 5.1, DTS5.1, D-TrueHD, DTS-HD
Power Supply
5V/2A DC (US/EU standards, CE/FCC/UL certified)
ESD Protection
± 8kV (air-gap discharge)
Human Body Model:
± 4kV (contact discharge)
Dimensions (mm)
250(D) x110 (W) x 26(H)
Weight (g)
720
Power Consumption (max)
10W
Operating Temperature
0˚C ~ 40˚C / 32˚F ~ 104˚F
Storage Temperature
-20˚C ~ 60˚C / -4˚F ~ 140˚F
V. Operation controls and Functions
Front Panel
1. ON/OFF: Power on/off switch.
2. Input LED: These green LED illuminate when the output select to the corresponding input.
3. EDID LED: These green LED illuminate when the audio EDID select to corresponding audio.
4. ARC LED: This green LED illuminate when the ARC function open.
5. POWER LED: This green LED illuminate when the device is connected with power supply.
6. OUTA KEY: Press this button to select the input source to HDMI OUT A.
7. OUTB KEY: Press this button to select the input source to HDMI OUT B.
8. EDID KEY: Press this button to select the 2.0CH, 5.1CH, 7.1CH audio output mode.
9. ARC KEY:Press this button to open or close the ARC function.
10. RST KEY: Press this button the matrix will reset to factory state (INPUT1, 2.0CH AUDIO MODE, ARC function closed)
11. IR: Remote control signal receive.