Kanguru 6 in1 Card Reader User Manual - 7.) Driver Installation:
7.) Driver Installation:
*****Drivers only required for Win98SE/2000 and Mac 8.6~9.2******
WIN 98:
1. Insert the Kanguru Master Drivers CD into your PC or laptop.
2. Open up the Kanguru USB2.0 Card Reader 6 in 1 (internal) folder found in
the Kanguru Card Readers Folder
3. Next, open the Drivers folder, followed by the Win 98 folder.
4. Double click the Setup.exe file to install the drivers.
5. Once the drivers have installed you can plug in the card reader for use.
WIN 2000:
1. Insert the Kanguru Master Drivers CD into your PC or laptop.
2. Open up the Kanguru USB2.0 Card Reader 6 in 1 (internal) folder found in
the Kanguru Card Readers Folder
3. Next, open the Drivers folder, followed by the Win 2000 folder.
4. Double click the Install.exe file to install the drivers.
5. Once the drivers have installed you can plug in the card reader for use.
WIN XP:
* Windows XP DOES NOT require drivers. The following instructions are for
installing icons to represent the 4 card reader drives. If you do not choose to install