Kanguru BioSTOR User Manual - page 9
Kanguru BioSTOR
- 9 -
1. Remove the USB cable and reinsert the drive and the Fingerprint
Reader program should appear. If it doesn’t open the Removable Disk
drive and double click on the Run.exe program.
2. Press any of the fingers that you have registered on the drive’s sensor.
The program should scan your print and unlock the hard drive portion of
this unit under a Local Disk letter as seen below.
Please note:
The Kanguru BioSTOR will automatically lock down the
secure partition when the drive is removed from a PC.
Locking the Drive:
You can lock the Kanguru Bio drive by either removing the drive for the pc, or by
right-clicking on the Finger icon in the taskbar and selecting "Lock USB Flash
Drive".
Using the Backup Password:
To use the backup password, simply click on the rescue password option in the
lower left hand corner of the program. You will then be prompted to enter the
correct password to gain access to the drive.