1. DL manuals
  2. Kanto
  3. Speakers
  4. YUMI POWERED SPEAKER
  5. User Manual

Kanto YUMI POWERED SPEAKER User Manual

Manual is about: bluetooth speakers

Summary of YUMI POWERED SPEAKER

  • Page 1

    User manual yumi powered speakers supporting your digital lifestyle ™ english yumi powered speakers.

  • Page 2: Table of Contents

    2 table of contents important safety precautions . . . . . . . 2 introduction / what’s in the box? . . . . . 3 front & rear panels . . . . . . . . . . . . 4 remote control . . . . . . . . . . . . . . 5 setting up your speakers . . . . . . . . . . 6 connecting audio sources . . . . . . . . . 7 usb ch...

  • Page 3: Introduction

    3 supporting your digital lifestyle ™ introduction thank you for choosing the yumi powered speaker system, designed by kanto in canada . Yumi outputs 30 w rms (60 w peak) per side into 6 ohm speakers, for remarkably bold and clean sound . Excellent sensitivity and frequency response specs provide de...

  • Page 4: Front & Rear Panels

    Front & rear panels 4 yumi’s volume knob functions as an input select knob as well . Push the knob to select an input source - it cycles through the following inputs depending on what input source was last used . Bluetooth rca 3.5mm opt1 opt2 volume/input select knob front panel 1 1” silk dome tweet...

  • Page 5: Remote Control

    5 supporting your digital lifestyle ™ remote control 1 mute 2 usb charge mode - see page 9 3 standby - press to enter standby mode bluetooth controls 4 previous track 5 play / pause 6 next track input selections 7 bluetooth input select 8 rca input select 9 3 .5 mm stereo mini-jack input select 10 o...

  • Page 6: Setting Up Your Speakers

    6 setting up your speakers the yumi powered speaker system is designed for either bookshelf or stand mounting . The stands should be of rigid construction, between 45 cm to 69 cm high and preferably have spikes . We recommend the kanto sp130 speaker stands to go with your yumi . The space between th...

  • Page 7: Connecting Audio Sources

    7 supporting your digital lifestyle ™ connecting audio sources rca & 3.5 mm stereo mini-jack (aux) connection yumi has five inputs, including dual rca, 3 .5 mm stereo mini-jack, two optical toslink connections, and bluetooth . Use the appropriate audio cable to connect your audio source components t...

  • Page 8: Bluetooth Pairing

    8 bluetooth pairing optical & bluetooth connection mobile devices opt 1 opt 2 game consoles digital dock media players yumi features bluetooth technology, and can be paired with many devices for wireless audio playback from your phone, mp3 player or tablet . Pairing is easy . 1 . Press the standby b...

  • Page 9: Bluetooth Operation

    9 supporting your digital lifestyle ™ bluetooth operation 1 . If not previously paired, pair your bluetooth device as described above . 2 . If yumi has been switched off or gone to standby mode, if another device has been connected to yumi’s bluetooth input, or if you have disconnected from yumi’s b...

  • Page 10: Connecting A Subwoofer

    10 connecting a subwoofer yumi is equipped with an rca connector to provide output signal to a powered subwoofer . Simply connect a single rca subwoofer cable from the sub out connection on yumi to the audio input on your subwoofer . If your subwoofer has a stereo l/r rca input, either left or right...

  • Page 11: Specifications

    11 supporting your digital lifestyle ™ specifications tweeters 1 inch silk dome woofers 5 inch kevlar nominal impedance 6 ohm sensitivity 2 .83v (/1w/1m) 87 db power output 30 watts rms per channel frequency response 60 hz - 20 khz @ ± 3 db input sensitivity 350 mv (line rca) frequency range 20 hz -...

  • Page 12: Warranty

    15a limited warranty to original purchaser kanto distribution inc . (kanto) warrants the equipment it manufactures to be free from defects in material and workmanship for the following limited warranty period of: 24 months parts and labour if equipment fails because of such defects and kanto or an a...