Kanto YUMI POWERED SPEAKER User Manual - Introduction
3
Supporting your digital lifestyle
™
Introduction
Thank you for choosing the YUMI Powered Speaker System, designed by Kanto in Canada . YUMI
outputs 30 W RMS (60 W peak) per side into 6 Ohm speakers, for remarkably bold and clean
sound . Excellent sensitivity and frequency response specs provide deep thumping lows and
clear, scintillating highs . YUMI is a truly flexible speaker system that can accept five input sources
(including optical and Bluetooth®), drive a sub-woofer, charge USB devices and switch between
115 V and 230 V inputs .
We recommend you read all instructions carefully before using the system, and keep them for
future reference .
Ensure that the Voltage Select switch is set to the correct input voltage for
your location.
Kanto cannot be liable for damage or injury caused by incorrect setup or use of
this product .
This powered speaker system was carefully tested and inspected during production, and before
packaging and shipping . After unpacking, please check for any damage . It is rare that a unit is
damaged during shipping, but if this happens contact your retailer immediately . You can also
call Kanto directly at 1-888-848-2643 or email support@kantospeakers .com .
What’s In the Box?
Power
Cord
User
Manuals
x3
x8
Self-Adhesive
Rubber Feet
Speaker
Wire (10’)
x2
‘AAA’
Batteries
YUMI Active
Speaker
(Left Channel)
YUMI Passive
Speaker
(Right Channel)
BASS
TREBLE
RESET
YUMI
YUMI
Remote
RCA - 3 .5 mm
‘Y’ cable (10’)