Kaon KSF-A3200HR User Manual - Easy Installation
ENGLISH
6 - ENG
Easy Installation
Press the MENU button.
Press the
▲/▼ buttons to select the desired item on the basic
setting screen.
1. Satellite List
Edit
: Press the RED button, you can edit satellite name and
satellite longitude.
Add
: Press the GREEN button, you can enter add satellite
menu.
Delete
: Press the YELLOW button, you can delete satellite.
Antenna Setup
: Press the BLUE button to select Antenna Set up.
Satellite Search
: Press TEXT button to select Satellite Search.
2. Antenna Setup
You can select Fixed Antenna or Motor Antenna in connection type.
Fixed Antenna
: You can set the LNB Freq., DiSEqC1.0, 22K, 0/12V, Toneburst, LNB Power.
•
LNB Freq.
:
Select the proper LNB frequency referring to your LNB.
•
DiSEqC
:
You can select and use appropriate port for your DiSEqC switch box.
•
22KHz
:
Depending on the user's antenna switch box or LNB.
You can supply either 22KHz by setting ON or OFF.
When selecting the U-LNB 1 and U-LNB 2, the 22KHz will be dimmed.
(MOTOR DiSEqC 1,2).
•
0V/12V
:
Depending on the user's antenna switch box. You can choose either 0V/12V.
•
Tone Burst
: Depending on the user's antenna switch box.
•
LNB Power
: Select the LNB Power On or OFF.
Motor Antenna
: You can set the LNB Type, Motor Type, Local Longitude, Local Latitude, Delete All,
Motor Setting, Limit Setup.
•
LNB Type
:
You can set the LNB Type.
•
Motor Type
:
Select the DiSEqC1.2 or USALS.
•
Local Longitude (USALS)
:
Press the NUMERIC buttons and enter the Longitude.
When the OK button is pressed. It can be toggled East/West.
•
Latitude (USALS)
:
Press the NUMERIC button and enter the Latitude.
When the OK is pressed, it can be toggled North/South.
•
Delete All
:
The reset option is available at the Motor Antenna menu.
•
Motor Setting/Limit Setup
: You can set the east/west limit by current position.
After the Degree, Longitude and Latitude is entered accurately, the
DiSEqC Motor will automatically move to the satellite’s position.
3. Satellite Search
If you want to search the channel, you select Satellite.
You can set FTA Only, Scan Channel, Network Search, Scan Mode items.
Moving the Search item and press OK button to start scanning.
•
Search type
:
Select the FTA+Scrambled, FTA or Scrambled .
•
Scan Channel
:
Select the Radio, TV + Radio, or TV Channel.
•
Network Search
: You can select Yes or No. When you select Yes, you can find more transponders
using the home network.
•
Scan Mode
:
Select the Auto Scan or Preset Scan.
4. TP Search
Pressing ◄ or ► buttons, you can switch satellite.
Edit
:
Press the RED button. Set frequency, Symbol rate and Polarity at the Edit TP.
Add
:
Press the GREEN button. Set frequency, Symbol rate and Polarity at the Add TP.
Delete
: Press the YELLOW button, you can delete TP.
Search
:
Press BLUE button to select TP Search.