Kaon KTF-I2001CO User Manual - 1.2 Setting Your Tv
ENGLISH
1.2.1 Using the THREE DIGIT CODE
1. Turn the TV on before setting the remote control.
2. Press
MENU
with
EXIT
button on the remote control for 2 seconds to convert to Setting Mode.
• ItwillconverttotheSettingModeafterthelampison.
Note : Setting mode will be exited if no input is made for more than 20 seconds.
3. Point the remote control toward the TV.
4. Find the 3-digit code for your manufacturer on the list below, and enter the code by using the number
buttons.
• Thelampwillblinkonceeachtimeyouenterthenumber.
• Ifavalid3-digitcodeisentered,lampwillblinkandbecomes“on”status.
5. CheckiftheTVisturnedoffafterenteringthe3-digitcode.
• IftheTVisoff,checkiftheTVisswitchedonbypressingthe
TV
button.(ProceedtoStep5).
• IftheTVisnotoff,enteranother3-digitcode.
Note : If an invalid 3-digit code is entered, lamp will be off for about 1.5 seconds and becomes “on” status,
and you can re-enter the 3-digit code.
6. Press
MENU
to finish.
• Thelampwillblink2timesandbecomes"off"status.
Caution : Some buttons may not work.
1.2.2 Using the AUTO SEARCH (CH▲, CH▼)
1. Turn the TV on before setting the remote control.
2. Press
MENU
with
EXIT
button on the remote control for 2 seconds to convert to Setting Mode.
• ItwillconverttotheSettingModeafterthelampison.
Note : Setting mode will be exited if no input is made for more than 20 seconds.
3. Point the remote control toward the TV.
4. Press
CH▲
or
CH▼
button once in turn to check if the TV is turned off.
• IftheTVisoff,checkiftheTVisswitchedonbypressingthe
TV
button.(ProceedtoStep5).
• IftheTVisnotoff,enteranother3-digitcode.
5. Press
MENU
to finish.
• Thelampwillblink2timesandbecomes"off"status.
Caution : Some buttons may not work.
1.2.3 Resetting the TV to the Factory Defaults
Press
TV
with
MENU
button on the remote control for 5 seconds.
• After5seconds,thelampwillblink2timesandbecomes"off"status.
1.2 Setting Your TV
6 - ENG
STB_Starman_HDCab_Ter_K7_RCU500S_F660VFD_109292_Eng.indd 6
2008-08-19 7:17:04