Kapsys SmartVision Quick Start Manual
QUICK STARTING
GUIDE
Introduction
Smart
Vision
is the first Android smartphone
designed specifically for people with vision
disabilities. Smart
Vision
is the first truly
accessible and assistive technology rich all-
in-one smartphone, with physical keyboard,
touchscreen and fully voice-controlled user
interface.
The user interface and functions have been
fully adapted to ensure that Smart
Vision
is easy
to handle and easy to use. Applications are
organized to allow a simple way to access with
selectable large format font sizes.
Smart
Vision
user interface includes also
voice-activated commands, voice controlled
«dictation mode» for writing messages. In
addition, applications like pedestrian turn-by-
turn navigation, digital magnifier with contrast
filters, OCR with automatic page detection mode
and NFC technology manager are included in
SmartVision.
Smart
Vision
delivers the best features
smartphones offer, simple to use and with
outstanding accessibility.
This Quick Start Guide describes only the most
frequently used functions. To get more detailed
information on Smart
Vision
please refer to the
User Manual on «www.kapsys.com» under
Support section.
The Home screen
The Home screen displays the main features
and applications of Smart
Vision
.
Keypad, Touchscreen or voice
commands
The Smart
Vision
offers three different interfaces
or operating modes, namely the keypad,
touchscreen and voice commands:
•
Keypad mode allows entering data such
as number or text using multi-tap mode. To
familiarize yourself with the keypad, please
refer to the introduction above where the
functions of each key and button are described
in detail.
.
•
Touchscreen mode is the standard way
of using smartphones. It allows users to
navigate through the various menus with their
fingertips. Tap on the screen to select an item
or confirm an action. In accessibility mode
Smart
Vision
supports additional command
and control gestures for easy navigation
through the screens and interaction with your
smartphone.
•
Voice commands mode allows
controlling
your
Smart
Vision
by voice or entering data with
natural speaking. To enable
voice commands, press the voice
command button on the right edge
of the phone.
Getting started
Inserting the SIM card and battery
SIM
Turn the phone over,
find the notch in the
lower left corner, and lift
the back cover.
Insert the SIM card
facing downwards and
the cut-off corner placed
at bottom right. Slide
the SIM card upwards
into the housing.
Turning your SmartVision on / off
Turn on the Smart
Vision
with a long press on the
ON/OFF button found on the top of the phone.
The voice recognition function is the result of the
latest technologies. All items displayed on the
screen are vocalisable. So you can completely
control your phone by voice.
A
short press followed by a beep allows you to
activate an item by pronouncing an on-screen
item (e.g. to start an application or enable a
setting, etc.), or to use a keyword
(1)
to obtain
information about Smart
Vision
status (e.g.
«
Battery level?
» or «
What time is it?
»).
Pressing and holding down the voice
command button enables entering speech text
(such as «
Hello, how are you?
») into an input
field of any kind. Release the button to end the
dictation. Please note that this feature requires
a connection to 3G or Wi-Fi data network.
You can combine different data entry modes.
For example, you can start entering a text in
voice entry mode then use the touchscreen or
keypad to add text or numbers or correct data
with C key.
¶
ON/OFF (long press)
Exit standby mode (short press)
·
Volume buttons +/-
¸
Mini USB connector (charge and computer
connection)
¹
Headset jack 3.5 mm
º
Menu associated to the current screen
Homescreen
Back (previous screen)
»
OK
Answer a call or confirm user input
▲▼
Navigate within menus or around a
displayed screen
C
Hang up a call, or delete user input
¼
SOS button. Pushing it downwards to trigger
the emergency procedure.
½
Camera lens
¾
Flash
¿
Contact pads for docking station
Accessoires
Smart
Vision
by KAPSYS is delivered with:
3
A battery
3
A 220/110 volts mains charger – 5 volts USB
3
A docking station for charging
3
A USB / micro-USB cable
3
A necklace
3
A pair of stereo earphones with a microphone
and a button
3
A protective case
3
A documentation
When the phone is turned on for the first time,
please follow the setup instructions.
Smart
Vision
is ready to be used when the home
screen is displayed.
To turn off Smart
Vision
, long press on ON/OFF
button, then follow the instructions.
Phone application allows
making calls, checking your
missed calls and accessing
to your voice mail.
Messages application allows
sending and receiving SMS
and MMS.
Email application allows sending and
receiving electronic mail, assuming you
have set your email account.
Applications icon allows listing all
applications available in your Smart
Vision
.
Favorites icon allows you accessing to
your frequently used applications.
Settings icon allows configuring your
phone.
The status bar at the top of the Home screen
gives number of information such as the level of
network reception, battery level, etc.
-1-
-2-
-3-
-4-
-5-
-6-
-7-
-8-
-9-
Front
1
2
Insert the battery by
placing
the
lower
section first, with the
connection pads at the
bottom right, then click
the battery into place
Lastly,
close
the
phone by inserting
the upper section of
the back cover first,
and by pressing all
around with a firm click.
3
4
Smart
Vision
by KAPSYS Overview
Back
Touch
screen
Home
Voice
commands
button
¶
¸
¹
º
»
¿
Alpha-
numeric
keypad
¿
¼
½
¾
·
If your Smart
Vision
switches itself to
standby, a short press on the ON/OFF button
reactivates the screen
Charging the battery
When first using Smart
Vision
, it is recommended
to charge the battery for at least four hours.
Charge the battery using either the docking
station or plug the cable included in the box
directly to USB connector.
Smart
Vision
cannot be inserted into the
docking station for charging if the protective
case is used.
If the screen remains black, please try the
battery insertion procedure again.
To return to the Home screen at any time,
press .
(1)
The complete list of Keyword is available
on SmartVision user guide.